Spray Handles

In answer to Greg's question, I have used the broken waste clamp as a spray handle. I used one of the 8 inch rods from the clamps I had made to glue down the top and bottom to attached the clamp to the neck block. It has worked out well, I have a small clamp that rotates as well, this enables me to turn the body as I apply the finish. The neck I have simply attached to a length of wood.



I have scuffed back the first coat of lacquer and applied another two layers on top since. It seems to be all coming along nicely. Touch wood

Time taken : 30 minutes
Tools used : brushes, KTM-9, sandpaper
AU$'s spent : Nil