I spent last night shaping the nut and getting it into place. I had not idea how I was going to make the 15 degree angle, using the old school protractor. I ended up using a flat piece of scrap with sand paper on it and another block underneath to raise the scrap to the angle of the neck. I then used my highly calibrated eye to hold the nut straight up and down whilst rubbing in the angle.
That ended up being quite rough so I cut slithers of sand paper and finished the nut by pulling the sandpaper between the neck and the nut.
Time taken : 2 hours
Tools used : sand paper, scrap wood, chisel, pencil
AU$'s spent : nil
No comments:
Post a Comment